hostforge.blogg.se - Mac power g5 linux

Mac power g5 linux how to#
Mac power g5 linux install#
Mac power g5 linux iso#
Mac power g5 linux windows#

Unless you left your machine's mainboard compartment open (without the translucent polycarb air guide). Try getting another keyboard and verifying that your machine is actually working correctly - if there's a red led lit (or flashing) on the main board you might have a hardware issue. If you did not reach the Open Firmware step - tough luck. You can set auto-boot? back to true now.) Troubleshooting (In the rare event it actually did work - you're done. aaaand if your luck is anything like mine, it won't work. If you still didn't manage to boot into the Open Firmware consult the Troubleshooting section, otherwise make sure your machine always boots into the Open Firmware: If you fall into the first category - congratulations, you can now wear your smug smile until the end of time, otherwise - don't get discouraged too quickly thanks to the following instructions you'll only have to do this once - for me it was more like five or six times. Try several more times while swearing a lot and randomly pressing and releasing the key combination.

Get awfully discouraged with the whole enterprise.

Fail to reach the Open Firmware screen a few more times.

Try pressing the combination right after you hear the initial boot up sound.

Fail to reach the Open Firmware screen.

Fail to reach the Open Firmware screen several times.

Mac power g5 linux windows#

Boot your machine while holding Windows + Alt + o + f keys.

Release the keys once you see the Open Firmware screen.

Boot your machine while holding Command + Option + o + f keys.

This process might be quite random and nerve-racking unless you own an Apple-issued wired keyboard. Now here's the fun part - we'll need to boot into the Open Firmware in order to change the boot sequence. Now you can plug your USB drive in the PowerMac and proceed to the next section. This varies from platform to platform so unless you're using GNU/Linux you'll have to google. PreparationStart off by downloading an image (let's call it image.img) and burning it onto a pendrive.

preferably wired preferably Apple keyboard,.

a USB pendrive, at least 8 GB in size (more on that later),.

PowerPC-flavored GNU/Linux distribution image of your choice (I used Ubunt 16.04 LTS but these instructions should apply equally to any other distribution),.

Mac power g5 linux iso#

In fact, you can download a live ISO image of the most recent version ( 16.10 at the time of writing this post) right off the official Ubuntu downloads page. Surprisingly enough, even though Ubuntu has dropped the official support for PowerPC quite early (since 7.04), there's a strong community still maintaining PowerPC ports of the distro & various packages.

Mac power g5 linux how to#

I've decided to write this post because these machines are getting old and any sort of info on how to boot GNU/Linux on them is getting sparser by the year. The machine in question is an early model of double-processor PowerMac G5, version 7.2 to be exact: Recently, I had a craving for some PowerPC action, so I dug up an old PPC970-based machine and had some considerable fun playing with it. Posted on 22:23 by Idorobots Linux PPC970 PowerPC Raspberry Pi Ubuntu benchmarks i7 P.S.Running modern GNU/Linux on PowerMac G5 - the complete instruction If so, is there anything, at all, that I need to do different than what the guide says?

Mac power g5 linux install#

If not, can someone tell me how to install ArchLinux on my computer.

Media: Insert media and refresh to show available burn speedsĬan I using the guide located here ( ) to install ArchLinux on my particular computer. Write Strategies: CD-TAO, CD-SAO, CD-Raw, DVD-DAO